SHW-R Submersible slurry pump

The design process of theWarmanSHW-R made extensive use of state of the art solids modeling to ensure rugged, dependable solids handling capability at lowest possible cost.

A heavy duty all chrome wet end coupled with a motor designed and built by Weir Minerals for the most demanding applications makes the Warman SHW-R the most dependable, long lasting, submersible pump you can buy.

• Size range (discharge)
  2" to 6"
  50 mm to 150 mm
• Capacities
  to 2,000 gpm
  to 455 m³/hr
• Heads
  to 175 ft
  to 53 m

BENEFITS

• Vortex design allows the SHW-R to pump any solids that pass through the pump suction, even stringy, fibrous or tramp material
• Recessed impeller provides long wear life on heavy slurry applications
• The SHW-R handles much higher concentrations of air than centrifugal pumps
• Particle degradation is greatly reduced since pumped solids do not pass through the impeller
• Temperature Sensor - Over-temperature sensors protect the motor by sounding an alarm or shutting down the unit if internal temperatures exceed safe operating limits
• Moisture detector - A twin electrode system provides double protection by detecting moisture intrusion in either the motor housing or the mechanical seal chamber
• Mechanical seals - The SHW-R incorporates Warman's proven balanced double-seal arrangement in which both sets of seal springs are enclosed in the oil reservoir. Silicon carbide seal faces are subject to submergence pressure only for greatly extended wear life
• Heavy-duty water end - Standard high chrome iron construction coupled with heavy section thickness provides the ultimate in protection against abrasive wear in heavy slurries
• Easy maintenance access - T-bolt construction allows rapid disassembly of the pump end for maintenance access. The heavy-duty impeller is not screwed on, but keyed to the shaft for easy removal and protection against movement

OPTIONAL FEATURES

• Cooling jacket
• quick disconnect
• Discharge elbow
• Sparger ring
• Slide bracket